WAGO-SPEEDWAY 767
Connecting Data and Supply Cables
47
767-4802/000-800 8DO 24V DC 0.5A IF (4xM12)
Manual
Version 1.1.0
Pos: 23.24 /Serie 767 ( WAGO-SPEED WAY)/Anschluss D aten- und Versorgungskabel/I/O-M odule/Anschluss_Aktoren 767- 48xx, 71xx allgemei n @ 5\mod_1249297826390_21.docx @ 39983 @ @ 1
To connect the actuators to the digital outputs, proceed as follows:
1. Disconnect the power supply from those devices on which you have
mounted the module.
2.
Insert the actuator cable plug into an output socket (3) of the module, and
tighten it via knurled-head screw.
3.
Screw a protective cap on all unused ports to ensure that IP67 degree of
protection is provided.
Pos: 23.25 /Serie 767 ( WAGO-SPEED WAY)/Anschluss D aten- und Versorgungskabel/I/O-M odule/Anschlüsse_4xM12_Sensor en/Aktor en - Bil d @ 5\mod_1249293750953_21.docx @ 39979 @ @ 1
Figure 17: Connectors M12 (exemplary)
Pos: 24 /D okumentation allgemei n/Glieder ungselemente/---Seitenwechsel--- @ 3\mod_1221108045078_0.docx @ 21810 @ @ 1
3
3
