765-1503/100-000
Appendix
106
Product manual | Version: 2.0.0
16DO FLD EI DC 24V 2.0A
Changes or modifications made to this equipment not expressly approved by WAGO
GmbH & Co. KG may void the FCC authorization to operate this equipment.
14.2 Operational Description
Product Description
The product 765-1503/100-000 is used to output digital field signals, e.g., to actuators,
which have been received by a higher-level controller.
Description of operation (FCC)
The product, a fieldbus module in the IP67 housing, serves the acquisition and output of
data via sensors and actuators for the industrial control technology. The integrated Blue-
tooth
®
interface of the product allows the parameterization, operation, diagnosis, and
monitoring using a mobile device and the WAGO App I/O Field.
The following figure shows the block diagram of the module.
Logic
Power
supply
(X31, X32)
I/O
ETHERNET
(X21)
ETHERNET
(X22)
Bluetooth (BT)
logic + antenna
Port (X01)
Port (X02)
...
Bluetooth
®
Transmitter
Table 71: Bluetooth
®
Transmitter
Technology used
Bluetooth
®
Low Energy
Modulation
GFSK
Data rate
1 Mbit/s
Work frequency
2402 ... 2480 MHz
Maximum power including tune up tolerance
Output power: +8 dBm
Tolerance: +2 dBm / –3 dBm
Antenna type
PCB monopole
Maximum antenna gain
1.25 dBi
We declare that we meet the EN 62479 standard with respect to the limiting value for low
powers less than 20 mW. Therefore, the product fundamentally corresponds to the Euro-
pean limiting values for high-frequency radiation.
