765-1103/100-000
Commissioning
66
Product manual | Version: 2.2.0
16DO FLD PN DC 24V 2.0A
Figure 20:
Settings
Menu Item,
Firmware Upgrade
Tab (Example View)
!
NOTICE
Put system in safe operating mode
Never perform a firmware update during ongoing operation of the system in which the
product is installed. Before any firmware update, the system must first be properly shut
down or put in a safe operating state.
Note
Create backup before update
When you update your product’s firmware, the state of your product before the update, in-
cluding the firmware used up to that point, can no longer be reconstructed unless a
firmware and configuration data backup exists.
Changes to settings require operator or admin rights. If you do not have these, the
Set-
tings
tab is grayed out and cannot be edited.
To update the firmware, you need a firmware container file:
FWUPDATE.ZIP
. You can get
it from the Downloads section of the WAGO website:
ü
.
Proceed as follows to update the firmware:
1. In the left-hand column of the WAGO I/O Field Webserver, click the
Settings
menu
item.
ð
The
Device configuration
tab appears.
2. Select the
Firmware upgrade
tab.
3. Click the
[Select file]
button.
ð
A file selection dialog opens.
4. Select the firmware container file
FWUPDATE.ZIP
from this dialog.
ð
The name of the selected firmware container file appears in the
File
field.
5. Click the
[Upgrade]
button.
ð
The firmware update is performed. After that, the port must be configured anew.
