216 Appendix
WAGO I/O System 750
750-8210/040-000 PFC200; G2; 4ETH; XTR
Manual
Version 1.7.0, valid from FW Version 04.01.10(23)
Table 118
: WBM “Configuration of SNMP v3” Page – “Actually configured v3 Users” Group
Parameters
Meaning
Authentication Type
Specify the authentication type for the SNMP v3
packets.
Possible values:
-
Use no authentication (“None”)
- Message Digest
5 (“MD5”)
-
Secure Hash Algorithm (“SHA”)
Authentication Key (min. 8
char.)
Specify the authentication key. The key must be
min. 8 and max. 32 characters long and contain
lower case letters (a
… z), upper case letters
(A
… Z), numbers (0 … 9), special characters !()*~'.-
_ but no spaces.
Privacy
Specify the encryption algorithm for the SNMP
message.
Possible values:
-
No encryption (“None”)
-
Data Encryption Standard (“DES”)
-
Advanced Encryption Standard (“AES”)
Privacy Key (min. 8 char.)
Enter the key for encryption of the SNMP message.
If nothing is specified here, the “authentication key”
is automatically used. The key must be min. 8 and
max. 32 characters long and contain lower case
letters (a
… z), upper case letters (A … Z), numbers
(0
… 9), special characters !()*~'.-_ but no spaces.
Notification Receiver IP
Specify an IP address for a trap receiver for v3
traps. If no v3 traps are to be sent for this user, this
field remains blank.
Click the respective
[Delete]
button to delete an existing user.
Click
[Add]
to add a new user.
The changes only take effect after the controller restarts. For this purpose, use
the WBM reboot function. Do not shut down the controller too early!
