WAGO I/O System 750 XTR
Commissioning 71
750-677/040-000 4PWM 24 VDC 0.2A XTR
Manual
Version 1.0.0
8
Commissioning
8.1
Configuration and Parameterization with
WAGO Software Tools
8.1.1
Start via WAGO-I/O-
CHECK
The I/O module is supported by the commissioning tool WAGO-I/O-
CHECK
as of
version 03.25.01(01).
Figure 17: Starting the Parameterization Dialog From WAGO-I/O-
CHECK
To start parameterizing the I / O module using the WAGO-I/O-
CHECK
commissioning tool, proceed as follows:
Requirements:
•
The node is connected to the computer.
•
WAGO-I/O-
CHECK
is open.
•
Communication settings are made.
1.
Left-click on the menu item
[Identify]
.
⇨
The node configuration is determined and the node structure is shown in
the overview area.
2.
Select the I/O module.
⇨
The I/O module is marked with a frame.
