WAGO I/O SYSTEM 750 XTR
Device Description
19
750-606/040-000 Power Supply 24 VDC XTR for Ex i XTR Modules
Manual
Version 2.0.0
3.2.2
Power Jumper Contacts/Field Supply
The power supply module 750-606/040-000 has 2 self-cleaning power jumper
contacts that transmit power for the field side. The contacts on the right side of
the power supply module are designed as spring contacts.
Figure 3: Power Jumper Contacts
Table 4: Legend
for Figure “Power Jumper Contacts”
Contact
Type
Function
1
Spring contact
Potential feed-in (U
o
) for field supply
2
Spring contact
Potential feed-in (0 V) for field supply
Do not exceed maximum current via power contacts!
The maximum current available from the
“Power Supply 24 VDC Diagn for Ex i
XTR Modules
” 750-606/040-000 is 1 A. Greater currents can damage the power
contacts. When configuring the system, ensure that this current is not exceeded.
If exceeded, an additional 750-606/040-000 must be used.
