WAGO-I/O-SYSTEM 750
Process Image
27
750-515 4DO 250V AC 2.0A/ Relais 4NO/ Potential Free
Manual
Version 1.0.1
Pos: 20 /All e Seri en (Allgemei ne Module)/Ü berschriften/N eue Ü berschriften/Ebene 1Prozessabbil d - Ü berschrift 1 @ 4\mod_1240983067828_21.docx @ 31942 @ 1 @ 1
4
Process Image
Pos: 21 /Serie 750 ( WAGO-I/O-SYST EM)/Prozessabbild Kl emmenbus/Hinweis: Prozessabbildmapping abhängig von FBK/PFC, ohne Status-/C ontr olbyte @ 6\mod_1256126797251_21.docx @ 43340 @ @ 1
Mapping of process data in the process image of fieldbus systems
The representation of the process data of some I/O modules or their variants in the
process image depends on the fieldbus coupler/controller used. Please take this
information from the section “Fieldbus Specific Design of the Process Data”
included in the description concerning the process image of the corresponding
fieldbus coupler/controller.
Pos: 22 /Serie 750 ( WAGO-I/O-SYST EM)/Prozessabbild Kl emmenbus/Digitalausg angskl emmen/Prozessabbild 750- x5xx 04 DO @ 4\mod_1236259594203_21.docx @ 28032 @ @ 1
Table 13: Output Bits
Bit 3
Bit 2
Bit 1
Bit 0
DO 4
DO 3
DO 2
DO 1
DO 1
Signal state DO 1 – Digital output channel 1
DO 2
Signal state DO 2 – Digital output channel 2
DO 3
Signal state DO 3 – Digital output channel 3
DO 4
Signal state DO 4 – Digital output channel 4
Pos: 23 /D okumentation allgemei n/Glieder ungselemente/---Seitenwechsel--- @ 3\mod_1221108045078_0.docx @ 21810 @ @ 1
