WAGO-I/O-SYSTEM 750
Device Description
17
750-513 2DO 230V AC 2.0A/ Relay 2NO/ Potential Free
Manual
Version 1.2.2
Pos: 20.11 /Serie 750 ( WAGO-I/O-SYST EM)/Gerätebeschr eibung/Anschlüsse/Leistungskontakte/F eldversorgung - Ü berschrift 3 @ 6\mod_1256294692864_21.docx @ 43664 @ 3 @ 1
3.2.2
Power Jumper Contacts/Field Supply
Pos: 20.12.1 /Serie 750 ( WAGO-I/O- SYST EM)/Wichtig e Erl äuter ung en/Sicher hei ts- und sonstige Hi nweise/Hinweis/Hi nweis: Potential einspeiseklemme für Vari ante /000-001 ei nsetzen! (nur LK für Er de bzw. keine LK) @ 18\mod_1393918443397_21.docx @ 146952 @ @ 1
Use the supply module!
The standard version of the 750-513 I/O module is equipped with an integrated
power contact for relaying the ground potential, while the version 750-513/000-
001 does not come equipped with a power contact. When required, use a power
supply module for the field-side supply of the following I/O modules.
Pos: 20.12.2 /Serie 750 ( WAGO-I/O- SYST EM)/Wichtig e Erl äuter ung en/Sicher hei ts- und sonstige Hi nweise/Vorsicht/Vorsicht: Verletzungsgefahr durch schar fkantige Messer kontakte! @ 6\mod_1256193279401_21.docx @ 43414 @ @ 1
Risk of injury due to sharp-edged blade contacts!
The blade contacts are sharp-edged. Handle the I/O module carefully to prevent
injury.
Pos: 20.12.3 /Serie 750 ( WAGO-I/O- SYST EM)/Gerätebeschr eibung/Anschlüsse/Leistungskontakt 1 LK (Messer/F eder) - Einl eitung @ 18\mod_1393922127812_21.docx @ 146986 @ @ 1
The I/O module 750-513 has 1 self-cleaning power jumper contact that supply and
transmit power for the field side. The contact on the left side of the I/O module is
designed as male contact and the contact on the right side as spring contact.
Pos: 20.12.4 /Serie 750 ( WAGO-I/O- SYST EM)/Gerätebeschr eibung/Anschlüsse/Leistungskontakt 1 LK (Messer/F eder) - Abbildung, ei nfache Br eite @ 18\mod_1393924095913_21.docx @ 146990 @ @ 1
Figure 3: Power Jumper Contacts
Pos: 20.12.5 /Serie 750 ( WAGO-I/O- SYST EM)/Gerätebeschr eibung/Anschlüsse/Leistungskontakt 1 LK (Messer/F eder) - Leg ende @ 18\mod_1393926089446_21.docx @ 147000 @ @ 1
Table 5: Legend for Figure “Power Jumper Contacts”
Contact
Type
Function
1
Spring contact
Potential transmission (Earth) for field supply
2
Blade contact
Potential feed-in (Earth) for field supply
Pos: 20.12.6 /Serie 750 ( WAGO-I/O- SYST EM)/Wichtig e Erl äuter ung en/Sicher hei ts- und sonstige Hi nweise/Achtung/Achtung: Maxi maler Str om Leistungskontakte 10 A @ 3\mod_1226499143500_21.docx @ 25029 @ @ 1
Do not exceed maximum current via power jumper contacts!
The maximum current to flow through the power jumper contacts is 10 A.
Greater currents can damage the contacts.
When configuring your system, ensure that this current is not exceeded. If
exceeded, insert an additional supply module.
Pos: 20.13 /D okumentati on allgemei n/Gli ederungsel emente/---Seitenwechsel--- @ 3\mod_1221108045078_0.docx @ 21810 @ @ 1
