WAGO 750-469/040-000 Manual Download Page 62

Page: 62 / 64

List of Tables

WAGO-I/O-SYSTEM 750 XTR

750-469/040-000 2AI Thermocouple configurable /XTR

Manual

Version 1.3.0

List of Tables

Table 1: Number Notation ................................................................................... 8

Table 2: Font Conventions .................................................................................. 8

Table 3: Legend for Figure “View” ......................................................................17

Table 4: Legend for Figure “CAGE CLAMP

Connectors” ..................................19

Table

5: Legend for Figure “Display Elements”...................................................21

Table 6: Technical Data

– Device .......................................................................23

Table 7: Technical Data

– Supply .......................................................................23

Table 8: Technical Data

– Communication .........................................................23

Table 9: Technical Data

– Inputs ........................................................................24

Table 10: Technical Data

– Field Wiring .............................................................24

Table 11: Technical Data

– Power Jumper Contacts ..........................................24

Table 12: Technical Data

– Data Contacts .........................................................24

Table 13: Technical Data

– Mechanical Conditions ............................................25

Table 14

: Technical Data ‒ Climatic Environmental Conditions ..........................25

Table 15: Standards and Rated Conditions for Explosion

Protection Applications ..............................................................................27

Table 16: Climatic and Mechanical Environmental Conditions

and Shipbuilding .......................................................................................28

Table 17: EMC

– Immunity to Interference .........................................................29

Table 18: EMC

– Emission of Interference .........................................................31

Table 19: Standards and Rated Conditions for

Rail Applications (EN 50155) ....................................................................32

Table 20: Setting Options for I/O Module 750-469/040-000 ...............................34

Table 21: Offset/Gain Values .............................................................................35

Table 22: Process Image Type K, With Wire Break Diagnostics .........................36

Table 23: Process Image Type S, With Wire Break Diagnostics .........................36

Table 24: Process Image Type T, With Wire Break Diagnostics .........................37

Table 25: Process Image Type J, With Wire Break Diagnostics .........................37

Table 26: Process Image Type E, With Wire Break Diagnostics .........................38

Table 27: Process Image Type L, With Wire Break Diagnostics .........................38

Table 28: Process Image Type N, With Wire Break Diagnostics ........................39

Table 29: Process Image Type U, With Wire Break Diagnostics ........................39

Table 30: Process Image Type B, With Wire Break Diagnostics .........................40

Table 31: Process Image Type R, With Wire Break Diagnostics ........................40

Table 32: Process Image mV Measurement ±120 mV ........................................41

Table 33: Process Image mV Measurement ±60 mV..........................................41

Table 34: Process Image mV Measurement ±30 mV..........................................42

Table 35: Description of Marking Example According to

ATEX and IECEx ......................................................................................52

Table 36: Description of Marking Example for Approved

Ex i I/O Module According to ATEX and IECEx .........................................54

Table 37: Description of Marking Example According to NEC 500 .....................55

Table 38: Description of Marking Example for Approved

Ex i I/O Module According to NEC 505 ......................................................56

Table 39: Description of Marking Example for Approved

Ex i I/O Modules According to NEC 506 ....................................................56

Summary of Contents for 750-469/040-000

































































Search results

Summary of Contents for 750-469/040-000

Reviews:

Related manuals for 750-469/040-000

Brands by name

Popular brands

WAGO 750-469/040-000, Manual

Search results

Summary of Contents for 750-469/040-000

Reviews:

Related manuals for 750-469/040-000

Brands by name

Popular brands