WAGO 750-1415/040-000 Manual Download Page 2

Page: 2 / 50

WAGO-I/O-SYSTEM 750 XTR

750-1415/040-000 8DI 24VDC 3ms 2-Wire XTR

Manual

Version 1.3.0

WAGO Kontakttechnik GmbH & Co. KG

Hansastraße 27

D-32423 Minden

Phone: +49 (0) 571/8 87 – 0

Fax:

+49 (0) 571/8 87 – 1 69

E-Mail:

[email protected]

Web:

www.wago.com

Technical Support

Phone: +49 (0) 571/8 87 – 4 45 55

Fax:

+49 (0) 571/8 87 – 84 45 55

E-Mail:

[email protected]

Every conceivable measure has been taken to ensure the accuracy and

completeness of this documentation. However, as errors can never be fully

excluded, we always appreciate any information or suggestions for improving the

documentation.

E-Mail:

[email protected]

We wish to point out that the software and hardware terms as well as the

trademarks of companies used and/or mentioned in the present manual are

generally protected by trademark or patent.

WAGO is a registered trademark of WAGO Verwaltungsgesellschaft mbH.

Summary of Contents for 750-1415/040-000



















































Search results

Summary of Contents for 750-1415/040-000

Reviews:

Related manuals for 750-1415/040-000

Brands by name

Popular brands

WAGO 750-1415/040-000, Manual

Search results

Summary of Contents for 750-1415/040-000

Reviews:

Related manuals for 750-1415/040-000

Brands by name

Popular brands