WAGO-I/O-SYSTEM 750 XTR
Device Description 19
750-407/040-000 2DI 220V DC 3.0ms XTR
Manual
Version 1.3.0
Table 4: Legend for Figure “Power Jumper Contacts”
Contact
Type
Function
1
Spring contact
Potential transmission (U
v
)
for field supply
2
Spring contact
Potential transmission (0 V)
for field supply
3
Spring contact
Potential transmission (ground)
for field supply
4
Blade contact
Potential feed-in (ground)
for field supply
5
Blade contact
Potential feed-in (0 V)
for field supply
6
Blade contact
Potential feed-in (U
v
)
for field supply
Pos: 29.6 /Serie 750 (WAGO-I/O-SYST EM)/Wichtige Erläuterungen (al te Str uktur)/Sicherheits- und sonstige Hinweise/Achtung/Achtung: Maxi mal er Strom Einspeisung 750-0407/040- 000 @ 17\mod_1382014146271_21.docx @ 134451 @ @ 1
Do not exceed maximum current via power contacts!
The maximum current to flow through the power jumper contacts is temperature
dependent:
•
Up to 60 °C: 10 A
•
From 60 °C: 8 A
Greater currents can damage the power contacts. When configuring the system,
do not exceed this current. If that is the case, you must use an additional supply
module.
Pos: 30 /D okumentation allgemei n/Glieder ungselemente/---Seitenwechsel--- @ 3\mod_1221108045078_0.docx @ 21810 @ @ 1
