GB
25
W 565
Problem
Cause
Remedy
Too much fog of
coating material
(Overspray)
Distance to the object too large
•
Too much coating material
•
applied
Reduce distance
➞
Turn material volume
➞
adjusting screw to the
left (-)
Paint in the
ventilating hose
Diaphragm soiled
•
Diaphragm defective
•
Clean the diaphragm
➞
Replace the diaphragm
➞
Poor covering
capacity on the wall
Spray material is too cold
•
Highly absorbent surface or paint
•
with poor covering capacity
Distance too large
•
Heat spray material
➞
(to
maximum 40°C
)
Cross spray (Fig. 8)
➞
Closer to the object
➞
Important Note regarding Product Liability!
Due to an EC ordinance in effect since 01.01.1990, the manufacturer is liable for his product
only if all parts originate from or were approved by the manufacturer and the devices
are assembled and operated correctly. The use of other accessories and spare parts can
partially or completely invalidate the liability.
How the product is handled, including preparation of the work place and spray
paint as well as the final result, is the sole responsibility of the operator.
Wagner excludes any liability for damage which may arise from overspray, application
errors, touch-ups, or non-compliance with the instructions provided here.
