WAGNER W 690 Flexio, Operating Instructions Manual

Page: 14 / 26

6
W 690 Flexio Extra Spray Kit AUS
4. Description/ Scope of delivery
Description/ Scope of delivery (Fig. 1)
1) Air cap 2) Nozzle
3) Union nut 4) Spray jet width adjustment
5) Wall Extra I-Spray spray attachment 6) Trigger
7) Material volume regulation 8) Gun handle
9) ON/OFF switch 10) Carry handle
11) Air volume control 12) Air hose
13) Cover of air filter compartment 14) Gun holder
15) Container (800 ml) 16) Valve
17) Ventilating hose 18) Carrying belt
19) Gravity spray attachment 20) Stirring rod
21) Feed hopper (2 pcs.) 22) Container (150 ml, Gravity spray
attachment)
23) Replacement nozzle seal (Gravity
spray attachment)*
24) Practice poster
25) Operating instructions (without
illustration)
26) Lubricating grease (without illustration)*
* This is inside the container: remove it before starting operations!
5. Field of application
Many different coating substances can be processed with the W 690.
A different spray attachment must be used, depending on the coating substance:
Coating Materials Suitable for Use Spray attachment
Low-viscosity coating substances:
Water- and solvent-based paints, finishes,
primers and wood sealer-preservatives
Gravity
Interior and exterior water based acrylic
wall, ceiling and fence paints, primers
and undercoats.
Wall Extra I-Spray
Coating Materials Not Suitable for Use
Materials that contain highly abrasive components, facade paint, caustic solutions and
acidic coating substances. Flammable materials.