WAGNER W 3500, Instruction Manual

Page: 20 / 36

GB
14
W 3500 Kit
2 year warranty
The guarantee runs for two years, counting from the date of sale (sales slip). It covers
and is restricted to free-of-charge rectification of faults which are demonstrably
attributable to the use of faulty materials in manufacture, or assembly errors; or free-
of-charge replacement of the defective parts. The guarantee does not cover incorrect
use or commissioning or fitting or repair work which is not stated in our operating
instructions. Wearing parts are also excluded from the guarantee. The guarantee
excludes commercial use. We expressly reserve the right to fulfil the guarantee. The
guarantee expires if the tool is opened up by persons other than WAGNER service
personnel. Transport damage, maintenance work and loss and damage due to faulty
maintenance work are not covered by the guarantee. Under any guarantee claim,
there must be proof of purchase of the tool through submission of the original receipt.
Wherever legally possible, we exclude all liability for injury, damage or consequential
loss, especially if the tool has been used for a purpose other than that stated in the
operating instructions, commissioned or repaired other than in accordance with our
operating instructions or if repairs are performed by someone who is unqualified.
We reserve the right to perform any repairs in excess of those stated in our operating
instructions. In case of guarantee or repair, please refer to your point of sale.
Warning
If the supply cord of this appliance is damaged, it
must only be replaced by a repair shop appointed by
the manufacturer, because special purpose tools are
required.
Warning: Do not connect the blue or brown wire to the
earth terminal of the plug! The wires in this mains lead
are coloured in accordance with the following code:
blue = neutral brown = live
As the colours of the wires in the mains lead of this
appliance may not correspond with the coloured
markings identifiying the terminals in your plug,
proceed as follows:

Should the moulded plug have to be replaced, never
re-use the defective plug or attempt to plug it into a
different 13 A socket. This could result in an electric
shock.

Should it be necessary to exchange the fuse in the plug
only use fuses approved by ASTA in accordance with
BS 1362. 5 Amp fuses may be used.

To ensure that the fuse and fuse carrier are correctly
mounted please observe the provided markings or
colour coding in the plug.

After changing the fuse, always make sure that the
fuse carrier is correctly inserted. With out the fuse
carrier, it is not permissible to use the plug.

The correct fuses and fuse carriers are available from
your local electrical supplies stockist.