8
VM 500
OPERATING MANUAL
EDITION 07/2014
ORDER NUMBER DOC2344502
2.3
SAFETY PARAMETERS
The control unit is only suitable for controlling spray guns. J. Wagner AG forbids any other use!
The control unit may only be operated under the following conditions:
The operating staff have previously been trained on the basis of this operating manual.
The safety regulations listed in this operating manual must be observed.
The operating, maintenance, and repair information in this operating manual must be
observed.
The statutory requirements and accident prevention regulation standards in the country
of use must be observed.
The control unit may only be operated if all parameters are set and all measurements / safety
checks are carried out correctly.
2.4
REASONABLY FORESEEABLE MISUSE
Coating work pieces which are not grounded
Use of defective components, spare parts or accessories
Use with non-authorized spray guns
2.5
RESIDUAL RISKS
Residual risks are risks which cannot be excluded even in the event of correct use.
If necessary, warning and prohibition signs at the relevant points of risk indicate residual risks.
Residual risk
Source
Consequences
Specifi c measures
Lifecycle phase
Skin contact with
solvent-based
paints and cleaning
agents
Handling of solvent-
based paints and
cleaning agents
Skin irritations,
Wear protective
clothing,
Operation,
allergies
observe safety data
sheets
maintenance,
disassembly
Solvent-based paint
in air outside the
defi ned working
area
Painting outside the
defi ned working
area
Inhalation of
substances
hazardous to health
Observe work and
operation instructions
Operation,
maintenance
