WAGNER PM500, Operating Manual, Page: 8 / 52

8
OPERATING MANUAL
VERSION 01/2013 ORDER NUMBER DOC 2335747
2.4
SAFETY PARAMETERS
WAGNER accepts no liability for any damage arising from incorrect use.
Use the device only to work with the materials recommended by WAGNER.
Only operate the device as a whole.
Do not deactivate safety fi xtures.
Use only WAGNER original spare parts and accessories.
2.5
PROCESSIBLE MATERIALS
Fluid materials like paints and varnishes.
Abrasive materials and pigments!
Greater wear of parts carrying the material.
Use the application-oriented model (fl ow rate/cycle, material, valves, etc.) as
indicated in Chapter 5.3.2.
Check if the fl uids and solvents used are compatible with the pump construction
materials as indicated in Chapter 5.3.1.
NOTICE
The operation of the pneumatic double diaphragm pump is only allowable under the
following conditions:
The operating staff have previously been trained on the basis of this operating
manual.
The safety regulations listed in this operating manual must be observed.
The operating, maintenance and repair information in this operating manual must
be observed.
The statutory requirements and accident prevention regulation standards in the
country of use must be observed.