manualshive.com logo in svg

WAGNER Jaguar, Operating Manual

Share
Download
WAGNER Jaguar Operating Manual Download Page 30

30

150 cm

3

 - 300 cm

3

 

B_04283

1

2

3

Molykote

80 Nm;  59 lbft

Molykote

Molykote

OPERATING MANUAL

VERSION 05/2015

ORDER NUMBER DOC2340282

5.9 

HEATER SET PC (OPTION)

The electric, continuous-fl ow heater with explosion protection is downstream of the pump. 
The coating product can only be heated to maximum 80 °C. The continuous-fl ow heater is 
fi tted with a temperature limiter.

The temperature is set using the temperature regulator. The coating product temperature 
is read off  the thermometer on the coating product output.

Heater and thermometer description

  see heater operating manual (Order No. 65860).

Assembly of the heater set PC on the PC heavy duty trolley:

1. 

Mount heater (2).

2.

Mount heater (2) on trolley (1).

3.

Connect heater in accordance with the operating manual.

4.

Mount enclosed fi tting (3) on the fl uid section's outlet fi tting.

Summary of Contents for Jaguar





























































































Reviews:

No comments

Brands by name

Popular brands

Load more brands