29
VERSION 08/2018
ORDER NUMBER DOC 2333538
IceBreaker 40-150 cm
3
5.7.2 RELIEF COMBINATION AND INLINE FILTER UP TO 270 BAR (OPTION)
Instead of the standard high-pressure filter the lower-cost filter-relief
combination and an inline filter can be used if only a small volume of
product will be processed.
Application: in pumps with a maximum product pressure of 270 bar;
3916 psi.
Relief combination and inline filter (see Chapter
).
Designation
1 Fluid section connection
2 Relief combination
3 Return line
4 Inline filter
5 Product outlet
B_03911
2
1
3
4
5
27 MPa, 270 bar, 3916 psi
5.8
STROKE COUNT (OPTION)
Each air motor has a 1/8" air connection with which the air pressure in the lower air motor
chamber can be measured. This signal can be used for counting the strokes in an external
controller, for example.
The pressure signal corresponds to the set working air pressure and is available during the
complete upwards stroke of the pump. If both of the signal edges are evaluated, the upper
and lower reversal point can be determined. An air hose (4/2-mm; 0.16/0.08-inch) is used
as an air signal line.
Order No. Designation
1
9998675
Threaded plug
2
9999066
Male stud elbow
3
9982072
Air hose (per meter)
4
9943049
Pneumatic pre-selection counter
B_03912
1
3
2
Pneumatic pumps: Wildcat, Puma and Leopard
B_03913
1
3
2
B_03703
4
Pneumatic pumps: Jaguar