WAGNER GM 50000EAC Translation Of The Original Operating Manual Download Page 56

Page: 56 / 108

B_03453

OPERATING MANUAL

EDITION 05/2015

ORDER NUMBER DOC2319150

The spray gun and the device must be cleaned and fl ushed daily. The cleaning and fl ushing
agents used must be compatible with the working material.

8.1.3

CLEANING AND FLUSHING THE DEVICE

Incompatibility of cleaning/fl ushing agent and working medium!

Risk of explosion and danger of poisoning by toxic gases.

Examine the compatibility of the cleaning and fl ushing agents

and working media on the basis of the safety data sheets.

WARNING

Damage to electrical devices!

Never immerse the spray gun in cleaning agent.

NOTICE

Liquid in air tube!

Functional faults caused by swollen seals.
Discharge current to ground No high-voltage.

  Always point the spray gun down when cleaning.
  Ensure that neither paint nor cleaning or fl ushing agent enters the air duct.
  When taking a break from work or when stored for a longer period, the spray gun

should be positioned with the adapter pointing downwards.

Summary of Contents for GM 50000EAC













































































































Search results

Summary of Contents for GM 50000EAC

Reviews:

Related manuals for GM 50000EAC

Brands by name

Popular brands

WAGNER GM 50000EAC, Translation Of The Original Operating Manual

Search results

Summary of Contents for GM 50000EAC

Reviews:

Related manuals for GM 50000EAC

Brands by name

Popular brands