FURNO 700 · FURNO 750
6
EN
Attaching the Cordset
The cordset (Fig. 2, 1) for the Heat Gun is delivered detached
from the gun (Fig. 2, 2). To attach, line up the cord with the
socket on the handle of the gun and press firmly together until
you hear a click. The cord set does not need to be removed.
Abb. 2
1
2
Touch Pad Control Panel
The heat gun gives you a wide temperature range to choose from,
depending upon the type of project. These can be controlled via
the Control Panel.
Description Fig. 3
1) Power button: Turns the heat
gun ON and OFF or switches
the heat tool into cool down
mode
2)
Mode selector: Sets the air
flow speed you are using
3) Air flow icon
4) Air flow indicator. Fills from
right to left
5) Text/number display
6) Temperature icon
7) Temperature indicator. Fills
from left to right
8) Temperature selector: Increase
the temperature (+)
9) Temperature selector: Decrease the temperature (-)
Fig. 3
2
1
4
3
5
6
7
9
8
Screen cur-
rently shows
default start-
up display.
300
o
C at high-
est fan speed.
Cool Down Mode (Fig. 4)
While the heat gun is operating, press the power button once
to enter cool down mode. When cool down mode is entered,
the gun will run for 3 minutes with maximum air flow. During
this period, the temperature bars will all flash and step down to
indicate cooling. To override cool down mode, press and hold
the power button for 2-3s.
