FURNO 700 · FURNO 750
5
EN
Using the Heat Gun
General Description
This Heat Gun is a quality power tool. Like any power tool, it can
be dangerous when misused. Read the following instructions
carefully and follow all safety precautions. It is the responsibility
of the owner to use the Heat Gun properly.
Specifications
Housing
Engineered high-impact corrosion and
heat-resistant polymers
Max. power consumption
2000 Watts
Voltage
220-240 V ~ , 50-60 Hz
Double insulation
Heat Output
approx. 60°C to 630°C
Weight
0.9 kg
Features Fig. 1
1) Control panel - temperature and fan speed
2) Hanging hook
3) Cordset with integrated stabilizers
4) Rear stabilizer fins (upright standing)
5) Side bars to prevent nozzle touching surface
6) Nozzle Heat Shield (barrel cover)
Fig. 1
5
2
6
3
4
7
1
Removing the barrel cover
The barrel cover can be removed when working in hard to
reach locations.
BE CAREFUL OF THE NOZZLE.
Increased risk
of burning exists when working without the barrel cover. To
remove the barrel cover, use a small flat head scew driver to lift
tab (Fig. 1, 7) over raised area.
