WAGNER FURNO 700, Owner'S Manual

Page: 5 / 40

5
Important Safety Information
Read all safety information before operating the equipment. Save theSe InStRuctIonS.
Save theSe InStRuctIonS
EN
Important electrical Information
Use only an extension cord that will accept the plug on the product. Make
sure your extension cord is in good condition. When using an extension
cord, be sure to use one heavy enough to carry the current your product
will draw. An undersized cord will cause a drop in line voltage resulting in
loss of power and overheating. A SJT type cord is required. Cord shall be
14 AWG minimum for general indoor use.
This appliance has a polarized plug (one blade is wider than the other). To
reduce the risk of electric shock, this plug is intended to fit in a polarized
outlet only one way. If the plug does not fit fully in the outlet, reverse the
plug. If it still does not fit, contact a qualified electrician. Do not modify
the plug in any way. When servicing, only use identical service parts.
Contact WAGNER for a replacement cordset.
General description
This heat gun is a quality power tool. Like any power tool, it can be
dangerous when misused. Read the following instructions carefully and
follow all safety precautions. It is the responsibility of the owner to use the
heat gun properly. Only adults should use a heat gun.
Specifications
Housing: .................Engineered high-impact corrosion and heat-resistant
polymers
Wattage: ................1500 Watts on highest, 30 Watts on lowest
Heat Output: ........Approximately 1300°F on high, approximately 125°F on
low
Weight: ...................1.95 pounds
For more details on multiple projects and ‘how to’ videos
please visit www.wagnerspraytech.com.