18
FinishControl 5000
GB
2
EXPLANATORY DIAGRAM (FIG. 1)
3
THE WAGNER CLICK&PAINT SYSTEM
POS. DESIGNATION
1
Nozzle
2
Air cap
3
Spray jet width adjusting lever (shaping air)
4
Spray jet level adjusting ring (vertical/horizontal)
5
Union nut
6
Spray attachment complete
7
Material volume regulation
8
Gun handle
9
Air volume control
10
Air hose
11
Click&Paint catch
12
Trigger (actuates turbine starting switch
material is
conveyed)
13
Container
14
Suction tube
POS. DESIGNATION
15
Container seal
16
Valve
17
Ventilating hose
18
Carry handle
19
ON/OFF switch
(I = ON, 0 = OFF)
20
Gun mounting for park position
21
Air filter cover
22
Air filter
23
Power cable
24
Air hose connection
25
Cleaning brush
26
Fine feed tube filter (red)
Coarse feed tube filter (white)
27
Funnel (3 pcs.)
28
Air hose fixing straps (2 pcs.)
With the Wagner Click&Paint System, the front part of the gun (spray attachment) can be replaced quickly and easily.
This enables a rapid material change without cleaning, and ensures that the right tool is available for every material and applica-
tion.
The following spray attachments are available:
Spray attachment
Area of application
StandardSpray (yellow)
Order No. 2321 879
Spray attachment with slit nozzle and 1000 ml stainless steel container. Processes all standard
paints.
FineSpray (brown)
Order No. 2321 877
Spray attachment with round nozzle and 1000 ml stainless steel container. Ideal for low-viscosity
paints and glazes.
WallSpray (white)
Order No. 2321 880
Dispersion spray attachment with slit nozzle and 1400 ml plastic container. Designed for processing
dispersions.
3.1
DISASSEMBLY OF THE SPRAY GUN
For assembly, insert the spray attachment into the gun handle so that the two arrows point at each other. Turn the gun handle
90° in the arrow direction until it audibly engages. (Fig. 2)
To remove the spray attachment, push the catch (Fig. 2, A) beneath the trigger down and turn the spray attachment by 90°.
EXPLANATORY DIAGRAM/ CLICK&PAINT SYSTEM
