7
ENGLISH
ASSEMBLY
1
2
A
B
3
4
5
6
NEVER point the spray gun at any part of the
body.
Aenon
Make sure the power cord is unplugged during
assembly.
1.
Fill the container with the material to be sprayed.
2.
Align the pickup tube: Loosen the nut above the container
that allows the lid to spin the pickup tube into position.
Tighten the nut when the pickup tube is in the desired
position.
A If spraying downward, the angled end of the pickup tube
should be pointing toward the front of the container.
B If spraying upward, the angled end of the pickup tube should
be pointing toward the rear of the container.
3.
Make sure the clamp lever is turned fully to the right.
4.
Rotate the paint container until the 2 pins locate into the
recesses in the yoke. Tighten the clamp lever to secure the
container to the lid Do not over-tighten.
5.
Attach the adapter to the opening on the back of the spray
gun. Attach the air hose to the opening on the back of the
adapter. Make sure both connections are tight.
6.
Insert the air hose tightly into the connection into the
turbine.
