4
English
Title
Assembly
1. Before using the unit, make sure the inlet plug is screwed
tightly into the Quick-clean™ adapter, or material will leak
from the adapter opening.
2. Tightly place the lid on the paint can. Align arrow
(a)
and
paint can handle
(b)
as shown.
3. Place paint can on the base so that the arrows on the lid
(c)
and the base
(d)
line up.
4.
Tightly close
latch on can strap. The paint can handle
may now be used for transporting the unit (
DO NOT
move
the unit by pulling on the paint hose). Insert the suction
tube until it reaches the bottom of the can.
5. Assemble core
(e),
roller cover
(f)
, and cap
(g)
. Attach
assembly to arm, making sure the roller assembly snaps
into the locking tab
(h)
as shown.
6. Attach spatter shield. Press the quick-release tabs
(i)
on
the handle and attach the arm to handle. When using the
extension, attach the arm to the extension, then attach the
extension to the handle.
(c)
(d)
(a)
(b)
(i)
(g)
(f)
(e)
(h)
