5
tecHnical Data
max. operating pressure
11.1 MPa (1600 PSI)
material inlet thread size
M12 x 1.5
Diffuser thread size
7/8 - 14 UN-2A
Wetted parts material
High-grade steel, aluminum, PTFE, hard metal
operating temperature range
40ºF to 104ºF (5ºC to 40ºC)
maximum material temperature
109ºF (43ºC)
maximum sound output
81 dB(A)*
Weight
Control Pro = 0.9 lb / Control Pro M = 1.1 lb
* Measurement location: 0.5 m away from the coating surface, 0.5 m behind
the spray gun, spray pressure 11 MPa, tip size 0.019.
introDuction
This airless spray gun is to be used for the high pressure atomization of liquid
coating materials.
i
The Control Pro spray gun can only be used with Control Pro
sprayers, spray tips, and hoses that are Control Pro compatible. Do
not use any non-Control Pro accessories with this system.
uSinG tHe Gun triGGer lock
1
2
Gun locked
(gun will not spray)
Gun unlocked
(gun will spray)
Always engage the gun’s trigger lock
when the gun is not in use.
1. To lock the trigger, flip the trigger lock
down until it stops in place behind the
trigger.
2. To unlock the trigger, flip the trigger
lock up until it snaps into place on the
gun handle.
NEVER point the spray gun at yourself.
