28
Cobra 40-10/2K
.
OPERATING MANUAL
EDITION 10/2010
PART NO. DOC322871
5.3.3
SHUTTING DOWN AND CLEANING
Note
The device should be cleaned for maintenance purposes, etc. Ensure that no remaining
material dries and sticks.
Procedure:
1. Breaks in work -> chap. 5.3.2, carry out.
2. Carry out the basic cleaning -> chap. 5.2.2.
3. Maintain the gun as laid down in the operating instructions.
4. Clean and check the suction system and, in particular, the suction fi lter.
5. When using a high-pressure fi lter: Clean and check the fi lter insert and fi lter body.
6. Clean the outside of the system.
7. Put the whole system back together.
8. Fill the system with solvent as laid down in Paragraph 5.2.4 “Filling with working
material“.
WARNING
Brittle filter pressure regulator!
The container on the filter pressure regulator becomes brittle
through contact with solvents and can burst
Flying parts can cause injury
Do not clean the container on the pressure regulator with
solvent.
SIHI_0014_GB
5.3.2
BREAKS IN WORK
1. Close
gun.
2. Close ball valve (2).
3. Release the system by opening the gun.
4. Close and secure gun.
WARNING
Hardened material in the spraying system when 2-component
material is worked!
Destruction of the pump and injection system
Follow the manufacturer‘s working instructions, particularly re -
garding the pot life.
Rinse thoroughly before the end of the pot life.
SIHI_0013_GB
