WAGNER 2363343, Owner'S Manual

Page: 7 / 128

FURNO 500
7
EN
Touch Pad Control Panel
The heat gun gives you a wide temperature range to choose from, depending upon the type of project. Temperature can be adjusted via the
Control Panel.
Temperature Guide LED display
Description Fig. 3
1) Power button: Turns the heat
gun ON and OFF or switches
to cool down mode 2) Mode selector: Sets the
temperature range and air
flow speed you are using
3) Mode indicator: Low air flow
/ low temperature range (See
Fig. 4, a) 4) Mode indicator: High air flow
/ high temperature range
(See Fig. 4, b)
5) Mode indicator: Cool down 6) Temperature indicator:
Shows the current heat
output setting (see Fig. 4)
7) Temperature selector:
Decreases temperature (-) 8) Temperature selector:
Increases temperature (+)
Fig. 3
2 1
4
3
6
5
8
7
Description Fig. 4a & 4b
Air flow mode:
LOW
Temperature range:
60
o
C - 550
o
C
Cycle temperatures:
See Fig. 3, (7 & 8)
= Illuminated
= not illuminated
Air flow mode:
HIGH
Temperature range:
100
o
C - 600
o
C
Cycle temperatures:
See Fig. 3, (7 & 8)
= Illuminated
= not illuminated
Fig. 4a Fig. 4b
60
o
C
550
o
C
450
o
C
350
o
C
250
o
C
150
o
C
100oC 600oC 500oC 400oC 300oC 200oC
Cool Down Mode
During rest periods or when you are finished with your project, press
the power button to enter cool down mode (Fig. 5). The blue cool down
indicator light will turn on and the gun will continue to run with the
element disabled, for cooling.