background image

VM 500

 

VERSION 09/2018

ORDER NUMBER DOC 2318724

6

1.3 

LANGUAGES

The operating manual is available in the following languages:

Original operating manual

Language

Order no.

German

2310485

Translation of the original operating manual

Language

Order no.

English

2318724

French

2318725

Italian

2318726

Spanish

2318728

Additional languages on request or at: 

www.wagner-group.com

1.4 

ABBREVIATIONS

Number of pieces

Spare part

Position

Stainless steel

Marking in the spare parts lists

Two components

Order no.

Order number

1.5 

TERMINOLOGY FOR THE PURPOSE OF THIS MANUAL

Cleaning

Cleaning

Manual cleaning of devices and device parts with cleaning agent

Flushing

Internal flushing of paint-wetted parts with flushing agent

Personnel qualifications

Trained person

Is instructed in the tasks assigned to him/her, the potential risks 

associated with improper behavior as well as the necessary 

protective devices and measures.

Electrically trained 

person

Is instructed by an electrician about the tasks assigned to him/her, 

the potential risks associated with improper behavior as well as the 

necessary protective devices and measures.

Electrician

Can assess the work assigned to him/her and detect possible hazards 

based on his/her technical training, knowledge and experience in 

relevant provisions.

Skilled person 

in the context of 

DGUV 209-052

A person who, based on his/her technical training, experience and 

recent vocational experience, has sufficient technical knowledge 

in the area of electrostatic coating and is familiar with the relevant 

and generally accepted rules of technology so that he/she can 

inspect and assess the status of devices and coating systems based 

on workplace safety.

 Additional requirements for skilled persons can also be found 

in TRBS 1203 (2010/amendment 2012): Expert knowledge in the 

areas of protection against excessive pressure, electrical hazards, 

and explosion protection (where applicable).

Summary of Contents for 2310478









































Reviews: