2.CONTACT INFORMATION
Thank you for your purchase! This quick-start guide will help you get the most out of your new Waggz grooming tub.
If you have any questions, need replacement parts, or want to purchase additional products, just get in touch!
Visit
910 Canal Pl, City of Industry, CA 91746
Call
626-549-1212
Follow
@waggzgrooming
3.GENERAL GUIDANCE
UPON ARRIVAL
Please carefully examine your grooming tub and review the packing list. If you notice any missing parts or damaged components,
notify Waggz immediately.
Do not attempt to disassemble the table before contacting Waggz.
CLEANING, CARE, AND MAINTENANCE
Waggz grooming tubs are built to impress and ready to work. Regular cleaning and routine maintenance will keep it that way!
Follow these steps to extend the life of your tub and protect your Waggz 2-year warranty:
WORKING CONDITIONS
Cool-down periods:
rest for 18 minutes after 2 minutes of continuous lifting and lowering
Temperature:
avoid extreme cold (<40°F) and extreme heat (>104°F)
Humidity:
avoid extreme dryness (<20%) and extreme humidity (>90%)
Altitude:
avoid extreme altitudes (1.86 miles above sea level)
Air pressure:
performs best between 700 and 1060 hPA
DAILY CLEANING
Remove hair and dander from the tub, then wipe clean with a mild detergent. Please avoid using anti-grease detergents and
citrus-based cleansers, which may damage the finish on your tub. Stains should be promptly treated with 1 part ethyl alcohol to 20
parts water, then rinse well. Dry all surfaces between uses.
QUARTERLY INSPECTION
•
Complete a visual inspection of all equipment, including controls and hydraulic mechanism
•
Check the tightness and state of wear on all screws, bolts, bushings, and pins
•
Check for leaks, then wipe off any lubrication residue around gas springs and pistons
•
Check the stability and installation of all adjustable components
•
Observe the lift mechanism to check for unusual sounds, vibrations, and oscillations
NON-ROUTINE MAINTENANCE
•
For safety reasons and to avoid invalidating the warranty, Waggz alone must diagnose and organize action for any faults relating
to the hydraulic pistons and electronic lift system.
•
Maintenance technicians must be familiar with the contents of this instruction booklet and may only use original Waggz parts and
components.
•
Always complete a full safety inspection of the tub after rough handling, falls, drops, or bumps.
WARNING
•
IF YOU EVER HAVE SAFETY CONCERNS ABOUT THE CONDITION OF COMPONENTS, IMMEDIATELY DISABLE THE EQUIPMENT TO
PREVENT USE UNTIL SAFETY RISKS HAVE BEEN REMOVED OR RESOLVED.
•
IMMEDIATELY RECORD AND REPORT ANY DEFECTS OR DAMAGES DIRECTLY TO THE MANUFACTURER.