background image

Portable Solar Lamp by Wagan Tech 

 

USER’S MANUAL — Please read before using this equipment. 

________________________________________________________________________________________________________________________________________________________________ 
 

 

 

www.wagan.com 

 

© 2004 Wagan Corporation. 

All Rights Reserved. 

Wagan and Wagan.com are trademarks used by Wagan Corporation. 

 
 
 
 

 

The Portable Solar Lamp has a novel design, a 1 Watt high 
efficiency solar panel, a direction adjustable lantern frame for 360° 
illumination.  It is an environment, emergency lamp, which can be 
used in the place where facility power is not available or often fails.  
It is also suitable for travel, camp, auto-maintenance, shop, school, 
etc.    
 

 

HOW TO OPERATE THE SPOTLIGHT AND FLUORESCENT 
TUBES 

 

1.)  Slide the function selector for illumination.  The duration time 

is about 3.5 hours 

2.)  Adjust the lamp frame for best illumination 

 
When the battery is on low level, the PCB will automatically cut off 
the lantern, which is good for prolonging the using life of the battery 
and prevent it from losing efficacy. 
 

HOW TO REPLACE THE FLUORESCENT TUBES 

  

1.)  Pull the bottom cover open (See Figure 1) 
2.)  Carefully open the light casing and then replace the 

fluorescent tubes 

3.)  Be careful when opening the light casing when replacing the 

fluorescent tubes.  The tubes might be easily detached and 
broken if they are NOT handled with care 

 

HOW TO RECHARGE THE BATTERY BY SOLAR PANEL 

 
Turn over the solar panel to face the sun light, and then the battery 
of the Portable Solar Lamp will be recharged by sun light.  The 
charging time is about 25-30 hours. 

 

 

 
HOW TO RECHARGE THE BATTERY BY 12V DC POWER 

 
Plug the DC power cord into your vehicle’s cigarette lighter socket, and 
then the battery of the Portable Solar Lamp will be recharged and the 
indicator light will be on.  The charging time is about 10 hours. 
 
The 12V DC power can be available from automobile or AC/DC adapter.  
The output power of the adapter should be more than 300mA, 12V, and its 
polarity should be matched with the specification indicated on the Portable 
Solar Lamp. 
 

PRECAUTIONS AND REMARKS 

 

1.  Do not put the Portable Solar Lamp in a place where it is too moist 
2.  Avoid rain when the Portable Solar Lamp is recharged by solar 

light 

 
SPECIFICATIONS 

 
-  1 Watt mono crystalline solar cell 
-  2 x 4 Watt fluorescent tubes, adjustable 
   optionally for 360° illumination 
-  Powerful spotlight 
-  12V DC cigarette lighter jack 
-  Built-in lead acid battery 
-  Automatic over-discharge protection 
 

 

Reviews: