Hip Shaper by Wagan Tech
7
www.wagan.com
© 2010 Wagan Corporation
All Rights Reserved
Wagan Tech and
wagan.com
are trademarks used by Wagan Corporation
User’s Manual—Read before using this equipment
8
Assembly
1. Assembly requires two people.
2. It is recommended that you place a protective covering (such as a mat)
under the Hip Shaper to protect the floor or carpet from damage.
3. Unpack your Hip Shaper where you will be using it. Be careful not to
damage any part.
4. Set the parts in a cleared area and remove all packing materials. Do
not dispose any packing materials until assembly is completed.
5. Place your Hip Shaper on a level, flat surface.
6. Attach the Sliding Track (unit B) to the Main Frame (unit A) by inserting
the root of the Sliding Track to the bottom of the Main Frame.
7. Pull the Quick Release latch down to tighten and secure together.
Trouble Shooting
DO NOT break down, repair, or alter this equipment on your own.
DO NOT continue using the equipment under following conditions:
Problems
Positions to be checked
• Abnormal noise is heard
during the use
• The cushion swags during
the use
• Unstable movement
• The cushion does not move
Is unit B attached to unit A securely?
Is Quick Release latch pressed down tightly?
Are foreign objects caught between the
wheel and orbit?
If the orbit becomes loose
after the Quick Release latch
is fastened.
1. Release the latch and
remove unit B (Sliding
Track) from unit A
(Main Frame).
2. Fasten the screw at
the root of unit B.
3. Install unit B into unit
A again as instructed
in steps 6 & 7.
If the Quick Release latch can
not be pressed down.
Usage
The Hip Shaper is a great equipment for ski-body conditioning. You can place
your feet or knees on the cushion and exercise the buttocks and leg muscles
through the close and open of patellofemoral joint.
This product can not be used for purposes other than exercise. Accidents
and physical injuries may occur if manual warnings and instructions are not
followed. The company will not be liable for product failure or damage,
physical accidents, or other problems arising from improper use. The warranty
will also not be valid under such circumstances.
8. Make sure all parts are tightened before you use the Hip Shaper.
B
A
Summary of Contents for Hip Shaper
Page 1: ...Item 2673 User s Manual Hip Shaper ...
Page 8: ......
