Working process instructions
Use the supplied key pin to click the
"ON/OFF" socket to unlock the battery
Please fasten the light to the
pole by the bolt
Step 1: Light switch off for
sun charging in daytime
Step 2: When the first time use, at
night, press the button "on" by
remote controller to turn on the
lamp, it will be the default lighting
mode (M1)---10% dim light when
no people PIR sensor
100% brightness for 30 seconds,
then turn to dim light again.
Step 4: After set M1 or M2 neutral lighting
mode, if you need to set other lighting
mode (brightness and timer mode), the
lamp will have memory function. In the next
day it will work with the same lighting mode
as we set up, and after the time is over,
then it will turn to default lighting mode M1.
Step 3: Use remote controller to choose M1 or M2 two neutral lighting mode
M1 (10% + PIR): 10% dim light when no people PIR sensor 100% brightness
for 30s, then turn to dim light again.
M2 (30% + PIR): 30% dim light when no people PIR sensor 100% brightness
for 30s, then turn to dim light again.
Notice: After choose M1 or M2, if do not press other button, it will keep the same mode
the second day.
