Wagan 7526, User Manual

Page: 8 / 32

iOnBoost
™
V8 Air by Wagan Tech
®
6
www.wagan.com
9. Securely connect the negative (−) black clamp to a non-moving, metal part of the engine or
frame as far away from the vehicle battery as possible.
10. After the clamps are correctly connected, the Ready Indicator will appear on the LCD
display.
11. Place unit on a secure surface away from moving parts.
12. Start vehicle engine. Stop if the vehicle does not start after 3 to 4 seconds of engine
cranking. Wait 3 to 4 minutes, then try again. If engine does not start after second attempt,
discontinue cranking and consult a professional.
13. When finished, disconnect the clamps in reverse sequence of connecting procedure—
first disconnect negative (black), then positive (red) clamps. Do not let the clamps touch
each other.
14. Disconnect the jumper cable assembly from the unit.
15. When convenient, completely charge the iOnBoost battery.
16. Store the unit and charge adapters in a cool, dry environment, away from flammable
materials. Remember to fully charge the unit every 6 months.
Brief Recap of Sequences for Connection and Disconnection
2
3
1
ORDER OF CONNECTION
2. Connect positive (red)
clamp to positive battery
terminal.
1. Connect cables to iOnBoost. 3. Connect negative (black)
clamp to solid metal ground
on engine or frame, away
from battery).
1
2
3
ORDER OF DISCONNECTION
2.
Disconnect positive
(red) clamp from positive
battery terminal.
1.
Disconnect negative
(black) clamp
from frame.
3.
Disconnect cables from
iOnBoost.