15A Intelligent Battery Charger by Wagan Tech
®
11
www.wagan.com
FAULT CODES
Fault Code
Cause
Solution
Clamps connected to wrong
terminals on battery.
Correct clamp connections on
battery.
The Charger is
overheating.
Make sure air vents on
Charger are clear. Charger
will automatically resume
charging when it has cooled
down.
Charger may be connected to
24 V battery.
Verify battery being charged
is 12 V.
1. An appliance is drawing
power from battery
being charged.
2. Selected charging rate
is too low for battery
rating.
1. Disconnect the
appliance and charge
battery again.
2. Select higher charging
rate and continue
charging battery.
Defective battery, will not hold
full charge.
Have battery checked by a
qualified technician. Replace
battery if necessary