![background image](http://html.mh-extra.com/html/wagan/7010/7010_user-manual_867510009.webp)
©2018 Wagan Corporation. All Rights Reserved.
Wagan Tech and
wagan.com
are trademarks of Wagan Corporation.
User’s Manual—Read before using this equipment
8
USAGE
Jack Function:
1. Stop the car and engage the car brake.
2. Check the machine switch, confirming it is in the off "O" position. If not,
please do so first, then connect the power plug into the car cigarette lighter
socket. (Note: if the car battery is not charged enough, please charge it first
by starting the car engine or replacing the battery)
3. Position the jack by the side of car tire and ensure the center of the Pressure
Rod is aligned to the loading part of automobile chassis. Then rotate the
adjustment screw to make it as close to the automobile chassis as possible.
4. Toggle the function switch to "Lift" and the direction switch to "Up". The
jack will begin to operate. When the distance between the car tire and the
floor is about 5cm, switch off the power. While the power is disconnected,
the machine will automatically lock and won't fall.
5. After changing the tire, flip the direction switch to "Down". The jack will
start to fall at a constant speed.
6. When finished operating, collect the cables and tools in the box.
Inflation Function:
1. Prepare for the equipment. Pull out the air hose and choose the correct
inflatable head to connect. Then turn on the power.
2. Adjust the function switch to "Inflation". The machine will start to inflate.
Please observe the change in pressure with the pressure gauge.
3. When finishing, please switch off the power first, then disconnect the
inflatable head and store in the tool box. Disconnect the power plug from
the cigarette lighter socket and collect the cables into the tool box.
NOTE: when inflating, do not use continuously for more than 10 minutes.