USER’S MANUAL — Please read before using this equipment.
© 2007 Wagan Corporation.
All Rights Reserved.
Wagan and Wagan.com are trademarks used by Wagan Corporation.
3
Ear Hook
1.
The ear hook is made of soft flexible rubber that fits practically all sizes of
user’s left and right ears.
2.
Just twist the ear hook and flip it over the barrel to change sides.
SETUP/PAIRING
1.
Setup/Pairing between Bluetooth headset and your mobile phone must be
done before use.
2.
Charge your Bluetooth Headset prior to Setup/Pairing.
3.
Make sure that the Bluetooth Headset is turned on first.
4.
Make sure that your mobile phone is within ten meters of your Bluetooth
Headset.
5.
Make sure that there are no other Bluetooth devices within 10 meters radius,
otherwise please remember the Bluetooth headset’s name (BT-PHF 18) you
want to pair with.
6.
To Setup/Pair, press and hold the power button for 3 seconds until the Red
and Blue LEDs flash alternatively.
7.
At the same time you will hear an indicator tone. When you hear this tone,
release the volume button. The Headset is now in its pairing mode.
NOTE:
If the volume button is pressed for less than 3 seconds pairing will fail.
AFTER SETUP:
a. Go to Bluetooth Connection in your mobile phone and select “Search or
Search Pairing Setting”. You can refer to your mobile phone’s user manual as
every mobile phone has its own access path.
b. Following the search, you mobile phone will display a device name 2442 which
is the model number of the Bluetooth Headset.
c. Press “Enter” and you will be asked to input the pin code. Enter ‘0000’.
d. When the Blue LED of your Bluetooth Headset flashes at long intervals, it
means that pairing and setup are successful.
e. Your headset is now ready to use.
NOTE:
You will only need to Pair/Setup once. Each time when you turn on your
mobile phone, it will be automatically paired with your Bluetooth headset.
Wireless Bluetooth Headset
By Wagan Tech
www.wagan.com
4
RECEIVING IN-COMING CALL / ENDING THE CALL
Press the Primary Key to answer any in-coming call. Press the same key again to
end that call.
REJECTING A CALL
Press the “Volume down” key for 3 seconds when you hear an in-coming call on
your Headset. Please note that this function will only work under Hands Free mode
of your mobile phone.
MAKING A PHONE CALL
When making a call from your mobile phone, make sure that it is set on “call
transfer to hands free or headset”. When this is done just make your call as usual.
Press the Primary Key to end any call.
MAKING A VOICE ACTIVATED CALL
a.
This is only possible when your mobile phone supports this function.
b.
Use hands free operation to set the headset connection.
c.
Press and hold the volume up key for a long interval and you will hear an
indicator tone.
d.
Speak out loud and clear the name and telephone number you want to dial.
e.
You call is put through.
REDIALING THE LAST CALL
Press and hold the volume down key for three (3) seconds, your last call will be re-
dialed when you hear a beep.
NOTE:
a.
This redial last call function is possible when it is in a hands free mode.
b.
There must be no in-coming call when re-dialing.
