Dear Customer
Thank you for purchasing the BH100 Bluetooth wireless
headphones. Please read this manual carefully and
follow the intructions in order to optimize the use of your
new headphones and enjoy your music wherever you like.
Includes
BH100 Bluetooth Headphones
3.5 mm stereo cable
USB cable
Technical Data
• Impedance: 32 Ohm
• Frequency: 100Hz-9000Hz
• Performance: 200 mW
• Maximum input power: 1000 mW
• Bluetooth Version: 4.0
• Range: up to 10m
• Battery: 3.7V, 250 mAh Li-ion battery
• Play/Talk time: Up to 8 h
5. Voice Call
Press the power button to answer a phone call, press
the power button again to end the call. Press the power
button twice to call the last number in your phone call
records. To reject a call, press and hold the power button
for 1-2 seconds.
6. Power indication
When the BH100 is running low on power, you may experi-
ence lagged transmission. Three short „beeps“ will notify
you if your battery is running low.
While charging the LED is red. When fully charged, the
LED is blue.
7. Charging
Charge BH100 whenever it is needed: plug into computer
via the USB cable. The BH100 may also be charged via a
power-to-USB adapter (not included).
Remark: fully charge your BH100 at least once a month
for optimal user experience.
Adjustable headband
Buttons
1 - Power
2 - Previous song / Volume up
3 - Pause / Play
4 - Next song / Volume down
5 - LED indicator
6 - Micro USB jack
7 - 3.5 mm audio jack
8 - Microphone
Instructions
1. Turning on and off
To turn on, press and hold the power button until LED
starts flashing blue and red. To turn off, press and hold
the power button until the LED flashes red.
2. Pairing and connecting the headset
Make sure that BH100 is turned off. Press and hold the
power button for about 3 seconds until the LED starts to
flash red and blue. Activate the Bluteooth feature on your
device and set it to search for Bluetooth devices. BH100
will be displayed on your BT device, select it for pairing.
“0000” is the pairing code if necessary.
Remark: pairing steps are only needed for first-time
connection; automatic connection is allowed on most
BT devices.
Double check with your BT device to see if “BH100” is
connected.
3. Connection via 3.5 mm jack
For devices without Bluetooth functionality use a 3.5 mm
jack cable to connect your device with the BH100.
When using a 3.5 mm jack the BH100 can be controlled
only by your input device. The handsfree mode is not
supported in this case.
4. Music playback
Press the dial button in position 3 to pause and play
music.
Slide the dial button to position 2 to switch to a previous
song or switch and hold it to increase the volume.
Slide the dial button to position 4 to switch to next song
or switch and hold it to decrease the volume.
EN
BH100
BLUETOOTH
STEREO HEADSET
