How to Quick Start to use WAFER MDB USD interface adapter
http://www.waferstar.com
Service skype: wafer-service
After powered on,keep to look at the USD-MDB adapter box status LEDs, when the
adapter box can be connected to the VMC,the MDB Status LED will flash some times
during Power on data exchange
If No
“ MDB LED” flashing happen,then Please check:
(1) Confirmed again,that vending machine support the MDB USD interface
(2) If the USD-MDB already has connected the Vending machine
(3) If can receive a data
“4040” from VMC
(4) Power off and Power on the VMC again to try
5. If MDB Master LED flash some times and also received the
“4040” data from VMC and
that means VMC has found this MDB adapter
After power on the USD-MDB
, Serial tool will get a self ID data:” Firmware version
and the config data Report
”
If serial tool cann’t get this data, you need to check the serial port is properly selected
If adapter box is connected successfully to the VMC ,then you can get other more data
from VMC,for example “410100010264A952” and “470047” You don’t need to do
anythings, our adapter box is already do the communication with the VMC with the config
data.
If you can get the data
“450146” Then Now Congraturations, Simulator adapter
has successfully connected to VMC and also has been enabled by VMC
6. Now we can send a command to select the goods to VMC
Send the data : 13000001002236
After dispensed the goods, VMC will send the data,for example: 4302000146
7. How can I get the fast technical service ?
Online service skype: wafer-service