EN
Technical description
TC
20
5
Technical description
The cooling box is suitable for mobile use. It can cool goods up to max. 30 °C
under ambient temperature (thermostatic switch-off with approx. +1 °C) or
keep them cool or warm them up to max. 65 °C or keep them warm.
If the device has reached the set temperature range, then it will automatically
switch over to the energy save mode. In this mode only the energy is con-
sumed which is required to reach the temperature inside the box.
The cooling is a wear-free thermo-electric cooler with heat removal through
a ventilator.
The cooling box is equipped with an automatic priority circuit. Thus it is en-
sured that with simultaneous connection to the alternating current circuit and
to a 12/24-V-battery, the alternating current circuit will be used.
6
Operation
I
NOTE
Before you put the new refrigerator into operation, you should clean
it inside and outside with a damp cloth for hygienic reasons (see
also chapter “Cleaning and servicing” on page 23).
6.1
Tips to save energy
I
NOTE
A ventilator in the interior space of the cooling box provides for the
circulation of the cold air within the box. Thus a better cooling ca-
pacity will be achieved. In order that the cold air cannot reach the
outside when opening the cooling box, this is equipped with a
switch which turns off the ventilator as soon as the lid is opened.
Choose a well ventilated installation location which is protected against
direct sunlight.
If you want to set an increased energy efficiency and a limited cooling
capacity for the cooler unit, use the cooler’s ECO mode.
Allow warm food to cool down first before placing it in the device to keep
cool.
Do not open the cooling device more often than necessary.
Do not leave the cooler unit open for longer than necessary.
