SinePower
Guarantee
25
The status LED (fig.
1
2, page 3) displays the following conditions:
10
Guarantee
The statutory warranty period applies. If the product is defective, please re-
turn it to the WAECO branch in your country (see the back of the instruction
manual for the address) or to your dealer. For repair and guarantee process-
ing, please include the following documents when you send in the appliance:
z
A copy of the receipt with purchasing date
z
A reason for the claim or description of the fault
11
Disposal
➤
If possible, always take the packaging material for recycling.
If you wish to finally dispose of the device, ask your local recycling
centre or specialist dealer for details about how to do this in accord-
ance with the applicable disposal regulations.
Display
Cause
Remedy
Green, constantly lit
The device is functioning.
–
Red, quickly flashing
Input voltage is too high.
Check the input voltage.
Reduce the input voltage.
Red, slowly flashing
The input voltage is too low.
Charge the battery.
Check cables and contacts.
Red, occasionally flashing
Overheating
Ensure better ventilation.
Make certain that the ventila-
tion slots are not covered.
Lower the ambient tempera-
ture.
Red, constant light
Short circuit or electrical wir-
ing error
Excessive load
Check electrical wiring.
Reduce the load.
SP160_SP350.book Seite 25 Donnerstag, 22. Februar 2007 1:51 13
