Waeco PowerPack PS200, Instruction Manual

Page: 20 / 88

Checking the battery condition
The charging level of the battery is indicated properly only with plugged-in charger
unit.
– Push the button “Test Battery“ (see E 1).
According to the battery’s charging level one of the 3 LED’s lights up (see E 2):
High = the battery is charged. No charging required.
Middle = the battery is sufficiently charged for actual operation. But needs
charging after use.
Low = the battery is flat. Charge the battery.
The PowerPack is equipped with an undervoltage protection. With low discharging an
acoustic signal is emitted. Please charge the PowerPack immediately to avoid damage.
Maintenance and servicing of the PowerPack
The PowerPack is equipped with a maintenance-free 12 V, 7 Ah battery.
Caution! Prevent the PowerPack from exposure to direct sunlight or other heat
sources.
The battery may explode due to overheating!
– Charge the PowerPack every 3 months when not in use.
– To clean the PowerPack, use a soft dry cloth.
To remove stubborn dirt, use a cloth which is only slightly dampened with water.
– Do not use solvents.
20
PS-200-12_q6 16.11.2005 13:49 Uhr Seite 20