Using the battery charger
PerfectCharge W2000
42
6.3
Jump starting
To prevent accidental short circuits when connecting between the
vehicle battery and vehicle parts, the terminals of the starter cable
are isolated.
d
Caution – danger of chemical burns!
Avoid coming into contact with acid residue from the vehicle
battery.
This is how to jump start a vehicle:
➤
Find a suitable location so that battery charger still remains
upright after the engine has started (vibrations).
d
Risk of injury
Stay away from moving engine parts at all times.
➤
Connect the battery charger (chapter “Connecting the battery
charger” on page 38).
➤
Set the switch (fig.
7
6, page 5) to the required voltage (“12 V”
or “24 V”).
➤
Set the switch (fig.
7
4, page 5) to “Jump start”.
➤
If starting is not possible immediately, charge up the battery in
advance.
➤
Start the engine for a maximum of four to five seconds.
Once the engine is running
➤
Disconnect the battery charger (chapter “Disconnecting the
battery charger” on page 43).
W2000.book Seite 42 Montag, 5. November 2007 6:00 18
