Waeco MW-SSC-01, Operating Manual

Page: 15 / 76

MagicWatch
Safety and installation instructions
15
2 Safety and installation instructions
Please observe the prescribed safety instructions and stipulations from the vehicle
manufacturer and service workshops.
Warning
To prevent short circuits, always disconnect the negative terminal of the vehi-
cle's electrical system before working on it.
If the vehicle has an additional battery, its negative terminal should also be dis-
connected.
Warning
Insufficient supply line connections could result in short circuits which:
–
Cause cable fires
– Trigger the airbag
– Damage electronic control devices
– Cause electric functions to fail (indicators, brake light, horn, ignition, lights)
Please observe the following instructions:
z
When working on the following supply lines, only use insulated cable lugs, plugs and
tab sleeves.
–
30 (direct supply from positive battery terminal)
– 15 (connected positive terminal, behind the battery)
– 31 (return line from the battery, earth)
Do not use plastic terminal strips.
z
Use a crimping tool to connect the cables.
z
When connecting to supply line 31 (earth), screw the cable
–
To the vehicle's earth bolt with a cable lug and a gear disc or
– To the sheet metal body work with a cable lug and a self-tapping screw
Ensure that there is a good earth connection.
When the negative terminal of the battery is disconnected, all data stored in the volatile
memories will be lost.
z
The following data must be set again, depending on the vehicle equipment options:
–
Radio code
– Vehicle clock
– Timer
– On-board computer
– Seat position
You can find instructions for making these settings in the appropriate operating
instructions.
Observe the following installation instructions:
z
Secure the parts of the control box in such a way that they cannot become loose un-
der any circumstances (sudden braking, accidents) and cause
injuries to the occu-
pants of the vehicle.
_MW-SSC-01.book Seite 15 Donnerstag, 27. September 2007 4:31 16