Safety and installation instructions
MagicWatch MWE810
12
1
Safety and installation instructions
See fig.
1
The following text only complements the figures of the supplemental
sheet. In itself it is not a complete safety and installation manual! Make
sure to observe the figures of the supplemental sheet!
Please observe the prescribed safety instructions and stipulations
from the vehicle manufacturer and service workshops.
The manufacturer will not be held liable for claims for damage resulting from
the following:
z
Damage to the appliance resulting from mechanical influences and
excess voltage
z
Alterations to the device without express permission from the manu-
facturer
z
Use for purposes other than those described in the operating manual
a
z
Installing the parking aid can cause problems on vehicles with
LED tail lights.
z
Observe the applicable legal regulations.
z
The control box should not be exposed to any moisture.
z
Secure the parts of the parking aid installed in the vehicle in
such a way that they cannot become loose under any circum-
stances (sudden braking, accidents) and cause
injuries to the
occupants
of the vehicle.
z
Do not fit any part of the parking aid where an airbag may open.
This could cause injury if the airbag opens.
z
The sensors may not cover signal lamps.
z
When fitting the sensors, make sure there are no objects fixed
to the vehicle (such as a bicycle rack) that are in the detection
range of the sensors.
z
The parking aid is designed as an additional aid, i. e. the device
does not relieve you of the obligation to take particular care
when manoeuvring.
_IA_MWE810.book Seite 12 Mittwoch, 3. März 2010 2:29 14
