Waeco CoolMatic CD50, Operating Manual

Page: 32 / 300

EN
Safety instructions CD50, CRD50
32

Disconnect the cooler and other power consuming devices from
the battery before connecting the quick charging device.
 Disconnect the cooler or switch it off when you turn off the
engine. Otherwise you may discharge the battery.
2.2 Operating the device safely
D
DANGER!
 Do not touch exposed cables with your bare hands.
!
CAUTION!
 Before starting the device, ensure that the power supply line
and the plug are dry.
A
NOTICE!
 Do not use electrical devices inside the cooler unless they are
recommended by the manufacturer for the purpose.

Do not place the device near naked flames or other heat
sources (heaters, direct sunlight, gas ovens etc.).

Danger of overheating!
Ensure at all times that there is sufficient ventilation so that the
heat that arises during operation does not build up. Make sure
that the device is sufficiently far away from walls and other
objects so that the air can circulate.
 Ensure that the ventilation slots are not covered.
 Do not fill the inner container with ice or fluid.
 Never immerse the device in water.
 Protect the device and the cable against heat and moisture.