EN
Operation
CFX95DZ2
18
Latching the cooler lid
➤
Close the lids.
➤
Press the latches (fig.
2
1, page 9) down, until they latch in
place audibly.
I
7.6
Setting the temperature
➤
Press the “SET” button (fig.
3
4, page 9):
– once for the large compartment
– twice for the small compartment
✓
The display of the respective compartment blinks.
➤
Use the “UP +” (fig.
3
10, page 9) and “DOWN –” (fig.
3
9, page 9)
buttons to select the cooling temperature.
You can adjust the cooling temperature so that each compartment works
as a refrigerator compartment or as a freezer compartment.
✓
The cooling temperature appears in the display for a few seconds. The
display flashes several times and then the current temperature is dis-
played again.
I
NOTE – Lid Open Alarm
If a lid is left open for three minutes or more and the device is
switched on, the respective interior light will flash until the lid is
closed.
NOTE
The temperature of each compartment can be set to –22 °C.
The manufacturer however recommends a cooling temperature
of –15 °C to –18 °C for normal usage and optimum energy
consumption.
