EN
Operation
CFX95DZ2
16
In “HIGH” mode, the battery monitor responds faster than at the levels “LOW”
and “MED” (see the following table).
The battery monitor mode can be selected as follows:
➤
Switch on the cooler.
➤
Press the “SET” button (fig.
3
4, page 9) four times.
➤
Use the “UP +” (fig.
3
10, page 9) or “DOWN –” (fig.
3
9, page 9)
buttons to select the battery monitor mode.
✓
Digital display will be as follows:
Lo (LOW),
Π
d (MED), HI (HIGH)
✓
The selected mode then appears in the display for a few seconds. The
display flashes several times before it returns to the current temperature.
I
Battery monitor mode
LOW
MED
HIGH
Switch-off voltage at 12 V
10.1 V
11.4 V
11.8 V
Restart voltage at 12 V
11.1 V
12.2 V
12.6 V
Switch-off voltage at 24 V
21.5 V
24.1 V
24.6 V
Restart voltage at 24 V
23.0 V
25.3 V
26.2 V
NOTE
When the cooler is supplied by the starter battery, select the
battery monitor mode “HIGH”. If the cooler is connected to a
supply battery, the battery monitor mode “LOW” will suffice.
