Waeco CoolFreeze Cargo 500, Instruction Manual

Page: 43 / 204

COOLFREEZE Operation
43
Note
For further information on the possible functions and settings,
please refer to the the control panel instructions.
➤
Press the “PRG/mute” button (fig. 0 3, page 7) for five seconds to store
the parameters you have entered.
✓
The parameters are saved and the device exits the program menu.
➤
If you do not wish to store the altered values, do not press any button
for 60 seconds.
✓
The parameters are saved and the device exits the program menu.
7.8 Setting manual defrosting
The device is equipped with an automatic defrosting function. If the set tem-
perature allows this, you can also defrost the device manually. To do this,
proceed as follows:
➤
Press the “
▼
” button (fig. 0 5, page 7) for five seconds.
✓
The device defrosts.
7.9 Switching off the cooling container
➤
Empty the cooling container.
➤
Clean the cooling container.
➤
Pull out the connection cable.
If you do not want to use the cooling container for a longer period of time:
➤
Leave the lid slightly open. This prevents odours from building up.
_kuehlcontainer.book Seite 43 Freitag, 28. Juli 2006 4:12 16