Waeco CoolAir SP950T, Installation Manual

Page: 36 / 284

EN
Installation CoolAir SP950T
36
7.3.2 Menu level 1: Set temperature
The unit always starts with a defined value for the room temperature. This
parameter can be configured between 17 and 30 °C (62 and 86 °F).
➤
Start configuration mode (chapter “Starting and ending configuration
mode” on page 35).
✓
The first digit of the display (fig. 8 5,page 6) shows the menu level
and the second and third show the parameter which can be set.
➤ Press the Operating Mode button (fig.
8
4,page 6) to change the
parameters.
➤
Use the + and – buttons (fig. 8 6 and 7, page 6) to select the target
value (in °C) at which the unit should start operation.
✓
The digits in the display flash until the parameter you entered is
confirmed.
➤
Press the Operating Mode button (fig. 8 4,page 6) to confirm your
entry.
✓
The set value is saved and is then used when the unit is restarted.
✓
You are now in menu level 1 again and can use the + and – buttons to
switch between menu levels.